Precise Temperature Control for Laser Systems and Industrial Applications Since 2002
Language
The failure will inevitably occur when using a laser chiller. Once the failure occurs, it cannot be effectively cooled and should solve in time. S&A chiller will share with you the 8 reasons and solutions for the overload of the laser chiller compressor.
During the use of industrial laser chiller, it is inevitable that the failure will occur. Once the failure occurs, it cannot be effectively cooled. If it is not detected and solved in time, it will affect the performance of the production equipment or cause damage to the laser over time. S&A chiller will share with you the 8 reasons and solutions for the overload of the laser chiller compressor.
1. Check whether there is refrigerant leakage in the copper pipe welding port in the chiller. Oil stains may occur in the leakage of the refrigerant, check carefully, if there is leakage of refrigerant, please contact the after-sales personnel of the laser chiller manufacturer to deal with it.
2. Observe whether there is ventilation around the chiller. The air outlet (chiller fan) and air inlet (chiller dust filter) of the industrial chiller should keep away from obstacles.
3. Check whether the dust filter and condenser of the chiller are clogged with dust. Regular dust removal depends on the operating environment of the machine. Such as spindle processing and other harsh environments, it can be cleaned once every two weeks.
4. Check whether the chiller fan works normally. When the compressor starts, the fan will also start synchronously. If the fan does not start, check whether the fan is faulty.
5. Check whether the voltage of the chiller is normal. Provide the voltage and frequency marked on the nameplate of the machine. It is recommended to install a voltage stabilizer when the voltage fluctuates greatly.
6. Check whether the compressor startup capacitor is within the normal value range. Use a multimeter to measure the capacitor capacity to see if the capacitor surface is damaged.
7. Check whether the cooling capacity of the chiller is less than the calorific value of the load. It's suggested that the optional chiller with a cooling capacity is greater than the calorific value.
8. The compressor is faulty, the working current is too large, and there is abnormal noise during operation. It's suggested to replace the compressor.
The above are the reasons and solutions for the overload of laser chiller compressor summarized by S&A chiller engineers. Hope to help you to learn something about the types of chiller faults and the fault solutions to facilitate quick troubleshooting.
We're here for you when you need us.
Please complete the form to contact us, and we'll be happy to help you.
TEYU S&A Chiller was founded in 2002 with 23 years of chiller manufacturing experience, and now is recognized as a cooling technology pioneer and reliable partner in laser industry.
Copyright © 2021 TEYU S&A Chiller - All Rights Reserved.
