Recirculating chiller for water cooled fiber laser

S&A Teyu CWFL-3000 recirculating chiller is applied for cooling 3kw water cooled fiber laser.

SEND INQUIRY NOW

Item NO.:
CWFL-3000
Product Origin:
Guangzhou,China
Shipping Port:
Guangzhou,China
Precision:
±0.5℃
Voltage:
220/380V
Frequency:
50/60Hz
Refrigerant:
R-410a
Reducer:
capillary
Pump power:
1.1KW
Inlet and outlet:
Rp1/2+Rp1
N.W:
95Kgs
G.W:
113Kgs
Dimension:
77*55*103(L*W*H)
Package dimension:
84*74*120(L*W*H)

SEND INQUIRY NOW

Product Description

S&A Teyu CWFL-3000 recirculating chiller is applied for cooling 3kw water cooled fiber laser.

The CWFL series water chillers are so multi-functional that the laser device and the QBH connector/optics can be cooled by the low temperature control system and the high temperature control system respectively at the same time, which can greatly reduce the generation of the condensed water and save cost & space.

High power water chillers features
1. With environmental refrigerant;
2. ±0.5℃ precise temperature control;
3. The intelligent temperature controller has 2 control modes, applicable to different applied occasions; with various setting and display functions;
4. Dual temperature to satisfy different needs of fiber laser device and the optics;
5. With Ion adsorption filtrating and test functions conform to fiber laser device operating requirements;
6. Multiple alarm functions: compressor time-delay protection, compressor overcurrent protection, water flow alarm and over high / low temperature alarm;
7. Multiple power specifications; CE approval; RoHS approval; REACH approval;

8. Optional heater and water filter.

9. Support Modbus-485 communication protocol, which can realize the communication between the laser system and multiple water chillers to achieve two functions: monitoring the working status of the chillers and modifying the parameters of the chillers.

THE WARRANTY IS 2 YEARS AND THE PRODUCT IS UNDERWRITTEN BY INSURANCE COMPANY.

Fiber laser industrial water chillers specification

parameter

Note: the working current can be different under different working conditions; The above information is for reference only. Please subject to the actual delivered product.

CONTOUR AND PARTS INTRODUCTION

Independent production of sheet metal, evaporator and condenser

Adopt IPG fiber laser for welding and cutting sheet metal.

High precision temperature control system with dual temperature control function

Temperature control accuracy can reach ±0.5℃. High temp. for QBH connector/optics and low temp. for laser device.

Multiple alarm protection

The laser will stop working once it receives alarm signal from the water chiller for protection purpose.

temperature controller

Equipped with water pressure gauges ,drain outlet with valve and universal wheels.

Water pressure gauges help monitor the discharge pressure of water pump while universal wheels facilitate the moving of the chiller.

drain outlet

Dual inlet and dual outlet connector equipped.

Chiller inlet connects to laser outlet connector. Chiller outlet connects to laser inlet connector.

water inlets & outlets

Level gauge equipped

Cooling fan of famous brand installed.

With high quality and low failure rate.

Customized dust gauze available and easy to take apart

CHILLER APPLICATION

water chillers application

WAREHOUSE

18,000 square meters brand new industrial refrigeration system research center and production base. Strictly execute ISO production management system, using mass modularized standard produces, and standard parts rate up to 80% which are the source of quality stability.

Annual production capacity of 60,000 units, focus on large, medium and small power chiller production and manufacture.

air cooled water chillers workshop

TEST SYSTEM

With excellent laboratory testing system, simulates actual working environment for chiller. Overall performance testing before delivery: aging test and complete performance test must be executed on each finished chiller.

WATER CHILLER TEST SYSTEM